Difference between revisions of "VP-44 Replace"
From Diesel Truck Resource - Wiki
Line 8: | Line 8: | ||
OK....here they all are in one post! | OK....here they all are in one post! | ||
− | [http:// | + | [http://www.youtube.com/watch?v=lPZR5an9LCY] |
[http://media.putfile.com/VP-44-Install-Part-II-Under-Hood-Tour Click here to watch VP-44-Install-Part-II-Under-Hood-Tour] | [http://media.putfile.com/VP-44-Install-Part-II-Under-Hood-Tour Click here to watch VP-44-Install-Part-II-Under-Hood-Tour] |
Revision as of 09:41, 13 February 2010
Replacing Your VP-44
Ongoing discussion about this article can be found by Clicking Here.
Video By Diesel-Dan
OK....here they all are in one post!
Click here to watch VP-44-Install-Part-II-Under-Hood-Tour
Click here to watch VP-44-Install--Part-III----Pump-Removal
Click here to watch Part-IV----Bench-Teardown
Click here to watch Part-V--VP-44-Install-on-Engine
On part "5", you will note a subtitle pop up that says "Shinny side towards Gear" that seem out out place. It is. This got moved out of place when i was editing for some reason...its in reference to the VP-44 nut that was about a min earlier......Guess i should watch these before i set them in stone!
--Iker42 16:39, 11 July 2007 (EDT)