View source for Injector Puller

== An Easy Injector Puller ==


''Original Write Up By Pred''


OK. here is what i have.
I had tried to remove the injector with vice grips, wiggiling, I didn't have a slap hammer,
So i decieded to make a tool to remove the injector easially.
I used a 3/4" piece of black pipe (gas line), That  cut to 3 1/2", Having a nice shoulder to sit against the head,

http://www.dieseltruckresource.com/pics/data/522/medium/IRT2.jpg

I ran a nut to the top of the bolt, and slid on two thick washers to act as the pulling device, before welding the metric nut on.
I then welded a metric nut (dont know the exact size) (but it is the same size as the injector threads)to a 7/16 bolt X 3" all threaded,
Then i needed to grind the edges of the metric bolt so it would fit into the 3/4" black pipe,

http://www.dieseltruckresource.com/pics/data/522/medium/IRT1.jpg

Here is a referance to how it looks with just the bolt on an injector 

http://www.dieseltruckresource.com/pics/data/522/medium/IRT7.jpg

So i then have this little package 

http://www.dieseltruckresource.com/pics/data/522/medium/IRT2.jpg

I placed the NEW TOOL, onto the injector, threaded it onto the injector 

http://www.dieseltruckresource.com/pics/data/522/medium/IRT4.jpg

Then wound the loose nut down the threads of the bolt using the orange wrench to hold the assy bach from tightening onto the injector and causing damage 

http://www.dieseltruckresource.com/pics/data/522/medium/IRT5.jpg

It was so very easy to do, a five year old could have would this out, and the injector came out nice and straight and easy 


http://www.dieseltruckresource.com/pics/data/522/medium/IRT6.jpg

Part of the reason why i made this tool is that i would have to remove the hood to use a slap hammer on cylinders 5+6<br>
These parts can be gotten at homedepo for just a couple of dollars, And i think it took me about 20 min to make.
I hope that this can be of service to a few of you out there who can utilize this method to remove your stubborn injectors!!! Like Butter! <br>

Peter.

--[[User:Iker42|Iker42]] 22:26, 9 July 2007 (EDT)