2low
Installing a switch which enables 2WD low only!
Originally posted in the forum by: bnold
View Original forum thread by clicking here
I installed my 2LOW system this past weekend with great results. I recieved all my parts for under $5... Parts used were:
- 12V Lighted Rocker switch- NAPA
- Inline fuse holder w/fuse- NAPA
- 1ft vac hose- NAPA
- vac solenoid from an older RX7
Some were interested in the vac switch I picked up. I actually got it from a friend of mine that is an RX7 nut. Whole system can be done for under 20 bucks!! PM me for info...
2LO lighted rocker switch
Vac solenoid from RX7 showing Vac hookups
Vac solenoid from RX7
The solenoids have a little clip on them for attachment. I used a piece of little 'L' braket and drilled a couple holes for a zip tie to go through. The clip would have probably held fine on the L bracket however I thought the engine vibration might have taken its toll. The solenoid is extremely secure now and works great!!
